VRLA SLI Battery for Locomotive (DLM-170, NF-360, NM-450)

    Structure Characteristics Perfect seal of post: unique structure of triple seal(patent: ZL 02 2 20024.X) to totally prevent the acid leakage. Retardant-lame and blast-guardsafety valve: the open and close pressure of the valve is stale and reliable. Effective structure for quakeproofing and heat dissipation. Handle ismounted on all cells for easy handing.

    Sionlight Other

    DLM-170

    Brief introduction


    VRLA Battery for electric locomotive is the patented product that is researched and developed by Sionlight its own.It adopts the latest modern technology, having a new structure with safety valveand special pole seal. It has many advantageousfeatures, such as, good resistance to impact and vibration, long cycle life, low self-discharge rate, high specific energy. There is no freeelectrolyteand no acid damp underthe normal usage.It can be the most ideal DC power source for the lighting and auxiliary electric devices in railway electric locomotive. 

       The product is executed in accordancewith the industry standards issued by Ministry of Railway of P.R. China TB/T3061-2008“Valve-regulated Lead-acid Accumulator for Railway Locomotive”.

    Structure Characteristics

        Perfect seal of post: unique structure of triple seal(patent: ZL 02 2 20024.X) to totally prevent the acid leakage.

        Retardant-lame and blast-guardsafety valve: the open and close pressure of the valve is stale and reliable.

        Grid which is designed by the latest modern technologyto enhance the utilization of active materialand the uniformity of the current distributionis made of special multi-element alloy to ensure the longer lifetime of thebattery.

        Die-casting copper core of bigger diameter, with large cross-sectional area is large, and high strength, enhance to the large discharge acceptability.

        Effective structure for quakeproofing and heat dissipation.

        Handle ismounted on all cells for easy handing.

    CharacteristicsPerformance

        Designed service lifeof the batteryfor locomotive operation ismore than 8years or 1600000 km.

        Cycle life: be more than 300timesand C5is more than 85% (DOD≤65%).

        Self-dischargeperformance is less than 4%/month(25℃, 28d).

        Charge acceptability:charge currentis more than40A.

        Seal reaction efficiencyis more than98%.

     


     

    Environmental Operation

        Altitude is not more than4000m.(For service at the altitude over 4000 m, an clear indication shall be given in the contract)

        Environmental temperature is between -40℃and +40℃.

        Relative humidity is not more than 95%.

        Service in windy, blowing dust, rainy and snowy weather is acceptable.

        Charge voltage is 110±2V.

        The cell of one string can not used separately.

    Electrical Performances

        1.1hr discharge characteristics under 25℃.

        2.5hr discharge characteristics under 25℃.

        3.10hr discharge characteristics under 25℃.

     

     

    NF-360        

    Brief introduction

    VRLA Battery(NF-360)for internal-combustion locomotive is researched and developed by Sionlighttogether with Locomotive Research Institute of Development Academy of Ministry of Railway.The post seal of the product adopts the patent technology and has quite high assembly and open valve pressure which can reduce water loss to a great extent. Compared with traditional VRLA Battery, NM-360 has a lot of advantage, such as good start-up ability under low temperature, high specific energy, safer and longercycle life. It can be the most ideal power source asinternal-combustion locomotive start-up, illumination and other standby power source system.

        The product is executed in accordancewith the industry standards issued by Ministry of Railway of P.R. China GB/T 7404.2—2013“Valve-regulated Lead-acid Accumulator for Diesel Locomotive”.  

    Structure Characteristics

         Perfect seal of post: unique structure of triple seal(patent: ZL 02 2 20024.X) to totally prevent the acid leakage.

        Retardant-lame and blast-guardsafety valve: the open and close pressure of the valve is stale and reliable.

        Grid which is designed by the latest modern technologyto enhance the utilization of active materialand the uniformity of the current distributionis made of special multi-element alloy to ensure the longer lifetime of thebattery.

        Die-casting copper core of bigger diameter, with large cross-sectional area is large, and high strength, enhance to the large discharge acceptability.

        Effective structure for quakeproofing and heat dissipation.

     

    CharacteristicsPerformance

        Designed service lifeof the batteryfor locomotive operation ismore than 6years or 900000 km.

        Cycle life: be more than 10000 times and C5 is more than 85% (DOD≤55%).

        Start up at normal temperature:start-up current is1700-1800Aand start-up timeis more than 300Sunder 25℃±5℃.

        Start up at low temperature:start-up currentis1500Aand start-up timeis more than 50Sunder -35℃±2℃.

        Self-dischargeperformance is less than 4%/month.

        Charge acceptability:charge currentis more than 64A.

        Seal reaction efficiencyis more than 98%.

     

    Specifications  

     

     

     

    Environmental Operation

        Altitude is not more than4000m.(For service at the altitude over 4000 m, an clear indication shall be given in the contract)

        Environmental temperature is between -40℃and +40℃.

        Relative humidity is not more than 95%.

        Service in windy, blowing dust, rainy and snowy weather is acceptable.

        Charge voltage is 110±2V.

        The cell of one string can not used separately.

     

     Electrical Performances

            1. 5hr discharge characteristics under 25℃.

            2. Start up performance at normal temp(25℃±2℃)

                            

            3. Start up performance at low temp(-35℃±2℃)

     

     

     

     

    NM-450        

    Brief introduction

    VRLA Battery(NM-450)for internal-combustion locomotive is researched and developed by Sionlighttogether with Locomotive Research Institute of Development Academy of Ministry of Railway.The post seal of the product adopts the patent technology and has quite high assembly and open valve pressure which can reduce water loss to a great extent. Compared with traditional VRLA Battery, NM-360 has a lot of advantage, such as good start-up ability under low temperature, high specific energy, safer and longercycle life. It can be the most ideal power source asinternal-combustion locomotive start-up, illumination and other standby power source system.

       The product is executed in accordancewith the industry standards issued by Ministry of Railway of P.R. China TB/T3061-2008“Valve-regulated Lead-acid Accumulator for Railway Locomotive”.

     

    Structure Characteristics

         Perfect seal of post: unique structure of triple seal(patent: ZL 02 2 20024.X) to totally prevent the acid leakage.

        Retardant-lame and blast-guardsafety valve: the open and close pressure of the valve is stale and reliable.

        Grid which is designed by the latest modern technologyto enhance the utilization of active materialand the uniformity of the current distributionis made of special multi-element alloy to ensure the longer lifetime of the battery.

        Die-casting copper core of bigger diameter, with large cross-sectional area is large, and high strength, enhance to the large discharge acceptability.

        Effective structure for quakeproofing and heat dissipation.

        Handle ismounted on all cells for easy handing.

    Structure Characteristics

        NM-450 part name

        Perfect seal of post: unique structure of triple seal(patent: ZL 02 2 20024.X) to totally prevent the acid leakage.

        Retardant- lame and blast-guard safety valve: the open and close pressure of the valve is stale and reliable.

        Grid which is designed by the latest modern technology to enhance the utilization of active material and the uniformity of the current distribution is made of special multi-element alloy to ensure the longer lifetime of the battery.

        Die-casting copper core of bigger diameter, with large cross-sectional area is large, and high strength, enhance to the large discharge acceptability    

        Effective structure for quakeproofing and heat dissipation

        Handle is mounted on all cells for easy handing.

    Performance Characteristics

        Designed service lifeof the batteryfor locomotive operation ismore than 6 years or 900000 km.

        Cycle life: be more than 10000 times and C5 is more than 85% (DOD≤55%).

        Start up at normal temperature:start-up current is2100-2200Aand start-up timeis more than 330Sunder 25℃±5℃.

        Start up at low temperature:start-up currentis1700-1800Aand start-up timeis more than 50Sunder -35℃±2℃.

        Self-dischargeperformance is less than 4%/month.

        Charge acceptability:charge currentis more than 80A.

        Seal reaction efficiencyis more than 98%.

      

     

    Environmental Operation

        Altitude is not more than4000m.(For service at the altitude over 4000 m, an clear indication shall be given in the contract)

        Environmental temperature is between -40℃and +40℃.

        Relative humidity is not more than 95%.

        Service in windy, blowing dust, rainy and snowy weather is acceptable.

        Charge voltage is 110±2V.

        The cell of one string can not used separately.

    Electrical Performances

            1. 1hr discharge characteristics under 25℃.

                      

            2. 5hr discharge characteristics under 25℃.

            3. Start up performance at normal temp(25℃±2℃)

     

            4.Start up performance at low temp(-40℃±2℃)

    Specifications

     

    Type Rated Voltage V Maximum Total Mass kg 10h Rate Discharge 5h Rate Discharge 1h Rate Discharge Size  mm
    I10A Rated Capacity Ah Final Voltage V I5A Rated Capacity Ah Final Voltage V I1A Rated Capacity Ah Final Voltage V Length Width Height
    DLM-170  2 15 17 170 1.8 28 140 1.75 102 102 1.7 85 173 365


     

     

    Type Rated Voltage V Maximum Total Mass kg 10h Rate Discharge 5h Rate Discharge 1h Rate Discharge Size  mm
    I10A Rated Capacity Ah Final Voltage V I5A Rated Capacity Ah Final Voltage V I1A Rated Capacity Ah Final Voltage V Length Width Height
    NF-360  2 25 - - - 72 360 1.7 260 260 1.6 165 159 365

     

     

    Type Rated Voltage V Maximum Total Mass kg 10h Rate Discharge 5h Rate Discharge 1h Rate Discharge Size  mm
    I10A Rated Capacity Ah Final Voltage V I5A Rated Capacity Ah Final Voltage V I1A Rated Capacity Ah Final Voltage V Length Width Height
    NM-450  2 39 - - - 90 450 1.7 325 325 1.6 223 187 370